BLE1-FEET / Creative Serger Accessory Feet
Presser Foot

BLE1-FEET / Creative Serger Accessory Feet

Availability: In Stock
  • Vendor:Babylock
$183.30

BLE1AT-FEET /  Serger Accessory Feet Package.

Guarantee fit for Babylock Sergers.

For Babylock Serger Models:
  • Eclipse: BLEISX, BLEIDX, BLEILX
  • Imagine: BLEIAT series
  • Enlighten BLE3ATW series
    Contains Serger Feet:
    • BLE - BLHFS: blind hem
    • BLE - BF: beads & pearls
    • BLE - CF3: cording, 3mm
    • BLE - CF5: cording, 3mm
    • BLE - EF: elastic applicator
    • BLE - RF: ruffling
    ON FABRIC EGDE :
    • Needle : Right 
    • Upper Knife : Engaged " UNLOCKED"
    • Stitch Selector : D 
    • Stitch type : 3-thread rolled 
    • Stitch Width : M
    • Stitch Length : 3-4 Rolled Hem 
    • Differential Feed : N-0.6 
    FLAT LOCK - ON FOLD
    • Needle : Right 
    • Upper Knife : Disengaged "LOCKED"
    • Stitch type : 2 - thread rolled 
    • Stitch Width : D
    • Stitch Length : 3-4 Rolled Hem 
    • Stitch Selector : D 
    • Differential Feed : N - 0. 6
    Elastic / Fishing Insertion 
    • Needle : Both 
    • Upper Knife : Engaged "UNLOCKED " 
    • stitch type : 4-thread rolled hem
    • Stitch selector : A
    • Stitch Width : 7.5 mm 
    • Stitch Length : 4
    • Differential : N 
    Fishing Line Insertion 
    • Needle : Right Needle
    Upper knife : Engaged "UNLOCKED"
    • Stitch type : 3-thread rolled hem 
    • Stitch selector : D 
    • Stitch width : M
    • Stitch Length : 1.5 Rolled Hem 
    • differential feed ; 0.6
    IMAGINE/ ECLIPSE
    • The imagine and eclipse have the convenience of snap -on presser feet .
    TO RELEASE : 
    • Raise the presser foot lever . Raise the needles to the highest position, push the presser foot release button located at the back of the presser foot holder .
    • Remove the foot .
    TO REPLACE :
    • Raise the presser foot lever . raise the needles to the highest position , place the foot under the presser foot holder aligning the bar of the foot with the groove in the holder . lower the presser foot lifter to snap it back into place .

    SHIRRING / RIFFLING "G" FOOT
         ITEM NO: BLE-RF

    • Needle : both 
    • upper knife : Engaged "UNLOCKED "
    • Stitch type : Balanced 4 thread over lock 
    • stitch selector : A 
    • stitch width : 7.5 mm 
    • stitch length : 4
    • Differential feed : 2

    BLINDHEM "H" FOOT 
       ITEM NO :  BLE - BLHFS

    • Needle : Right
    • Upper Knife : Engaged "UNLOCKED"
    • stitch type : 2 - thread over lock
    • stitch selector : B
    • Stitch width : 5.0 mm
    • stitch length : 4  
    • Differential feed : N (N-0.6 for liner fabrics)

    SHIRRING / RUFFING "G" FOOT
        ITEM NO. BLE-RF

    • Needle : Both 
    • Upper Knife : Engaged "UNLOCKED"
    • Stitch type : Balanced 4 - thread overlock 
    • Stitch selector : A 
    • Stich width : 7.5 mm
    • stitch l;enth : 4
    • Differential feed : 2

    PIPPING / CORDING FOOT 

    "P3"  = 3mm Cording      Item No. BLE-CF3

    "P5" = 5mm Cording     Item no. BLE  - CF5

    • Needle : Both 
    • Upper Knife: Engaged "UNLOCKED"
    • Stitch type : Balanced 4 - thread over lock
    • Stitch selector : A 
    • Stitch width : 7.5 mm
    • Stitch Length : 3 
    • Differential feed : N

    NOTE: 

    • Insert fabric (b) , to be ruffled , with right side up , under the guide .
      Insert fabric (a) , not to be riffled , with right side down , in the guide .
    • sew a test to find ruffling ration for your particular fabric weight .
      The thicker the fabric the less gathering you will have .

     


        Frequently Asked Questions (FAQs)

        Have a Question?

        Be the first to ask a question.

        Ask The Gurus