Babylock Double Fold Bias Binder for Overlock & Cover-stitch
Presser Foot

Babylock Double Fold Bias Binder for Overlock & Cover-stitch

Availability: Out Stock
  • Vendor:Babylock
$69.30
Call for Stock

Babylock Double Fold Bias Binder for Overlock & Cover-stitch

  • Original parts for Babylock model:
    • Evolve (BLE8W-2)
    • Evolution (BLE8W-2)
    • Ovation (BLE8)
  • This double fold bias binder will turn fabric strips into binding and attach it to project edges all in one step.
  • This attachment is exclusively for the cover-stitch and Evolve, and is perfect for curved edges, collars, and necklines on knit or woven fabrics.

For 1 - 1/2
STITCH USED :

  • Chain Stitch - C3 Needle Position 
  • Naroow Right Cover Stitch : C2 - C3
  • Type Application : Binding the edge of projects.
  • Fabric useed : Light weight to medium weight woven fabrics cut on bias.

FOR 1-1/8 inch Binder: 

STITCH  USED :

  • Naroow right cover stitch C2-C3
  • Chain stitch - C3 Needle positon 
  • Sewing Speed : Slow to moderate 

INSTRUCTION : 

STITCH LENGHT : 3-4 

  • Upper Kinfe : Disengaged  " LOCKED " 
  • Upper Looper : Down
  • Sewing Table : On 

BAISE STRIP CUT SIZE : 

1-1/ 8 inch Binder: 

  • cut 1-1/8 inch bias from fine fabric such as calico , muslin etc. 
  • cut 1 inch wide for medium weight fabric such as trigger , it wt. denim 

1-1/2 inch Binder :

  • cut 1-3/9 inch for  fine fabrics such as calico , muslin , etc .
  • cut 1-1/4 inch wide for medium weight fabrics such as trigger , it . wt . denim . 

 TEAT WITH FABRIC STRIP TO MAKE SURE OF CORRECT WIDTH OF BIAS .

  1. Secure attachment to table with guide fixing screws .

  2. cut fabric strrip to size needed.
  3. Rasie presser foot . with the point of the bias strip, place strip into attachment .
  4. use tweezers to feed the strip into the attachment .
  5. Place the folded bias up to the needles and under the presser foot .
  6. turn the hand wheel 3-4 timed to secure the stitching in the fabric.
  7. Place the fabric that is to  be bound into the slot of the attachment . Place in the folded  bias in the front of the presser foot .
  8. Loosen the guide fixing screws and move the attachment right or left to align the attachment with the needle position .
  9. Sew  test for proper alignment before sewing on the project . 

 


      Frequently Asked Questions (FAQs)

      Have a Question?

      Be the first to ask a question.

      Ask The Gurus