B0421S10A Single Downturn Feller (1/4')/ Babylock/coverstitch/evolve/Evolution/ovation/Gloria
Presser Foot

B0421S10A Single Downturn Feller (1/4')/ Babylock/coverstitch/evolve/Evolution/ovation/Gloria

Availability: In Stock
  • Vendor:Babylock
$40.30

B0421S09A Single Downturn Feller (1/4")/ Babylock/Coverstitch/Evolve/Evolution/Ovation/Gloria 

  • For cover-stitch models

Original parts for Babylock model:

  • Coverstitch (BLCS)
  • Evolve (BLE8W-2)
  • Evolution (BLE8W-2)
  • Ovation (BLE8)

Single Downturn Feller - 1/4
Stitch Used:

  • Narrow Left Cover stitch - only C1 - C2 
Single Downturn Feller - 5/8 inch

Stitch Used: 

  • Narrow Left Cover Stitch - C1- C2 
  • wide cover stitch -C1- C3

Single Downfeller -1 inch
stitch Used :

  • wide cover stitch C1- C3
  • triple cover stitch C1- C2 - C3 
  • narrow left cover stitch C1 - C2 

Application : Hem straight edges of projects .

Fabrics:

1/4 inch Feller -  Lt. wt. denim , Chambray , broadcloth , calico , polyester, and rayon

NOTE : WILL NOT WORK WITH POLAR FLEECE OR SWEATSHIRT FLEECE

5/8 inch and 1 inch feller - Lt. wt. denim , chambray , broadcloth ,calico ,ultrasuede , leather .

NOTE : Will work with two  layers of it. wt. polar fleece with no seams .

SEWING SPEED: Moderate to slow 

INSTRUCTION :

  • Stitch length : 3-4 
  • Cutting blade : Disengaged "LOCKED"
  • Upper looper : Down 
  • Sewing table : ON 

Attachment :  Make sure the attachment is in the front and the center screw position of mounting bracket to avoid being too close to the toe of the presser foot .

  1. Secure the attachment to the table with guide fixing screws .
  2. To start hemming , finger press under 1/4 inch for 3-4 inches .
  3. Feed the fabric (right side up ) through attachment and pull the fabric  to the needles and under the presser foot .
  4. Make sure the fabric is still folded when placing under the presser foot .
  5. keep fabrics turned under when feeding into attachment to insure the fabric will roll under when sewing .

    Frequently Asked Questions (FAQs)

    Have a Question?

    Be the first to ask a question.

    Ask The Gurus