D13-4 08E Collarette Binder w/Base 4 ply (8mm)-30mm for Babylock Cover-stitch/Ovation and Gloria only
Presser Foot

D13-4 08E Collarette Binder w/Base 4 ply (8mm)-30mm for Babylock Cover-stitch/Ovation and Gloria only

Availability: In Stock
  • Vendor:Babylock
$70.60

D13-4 08E Collarette Binder w/Base 4 ply (8mm)-30mm for Babylock Cover-stitch/Ovation and Gloria only 

Original parts for Babylock model:
  • Coverstitch BLCS
  • Ovation 
  • Gloria

Features:

    • This double fold bias binder will turn fabric strips into binding and attach it to project edges all in one step.
    • This attachment is perfect for curved edges, collars, and necklines on knit or woven fabrics.
    • Works with Babylock cover-stitch machines and Ovation.

    Knit woven double fold bias binder

    Stitch Used :

    • Left , center , or Right Chain Stitch
    • Narrow Left or Right Coverstitch  
    • Wide Coverstitch 

    Applicaton :

    • This double fold bias binder for the baby lock coverstitch machine is a great attachment for binding  your project edges .

    Fabrics and cutting instruction :

    • For binding strips on  single Knits , cut crossing grain of fabric.
    • For binding strips on woven fabrics , cut strips on the bias grain of fabric.
    • For the  8 mm binder - cut strips 30mm wide 
    • For the 10mm binder - cut strips 36 mm wide 
    • For the 15mm binder -  cut thre strips mm wide 

     Sewing speed : Moderate to slow 

    INSTRUCTIONS:

    Stitch length; 3-4

    1. With the wrong side of the fabric facing you , feed the binding strips through the serpentine fabric guide and into the binder .
    2. NOTE: Cut the end of the strip at an angle to help feed it through the binder .
    3. Lay the excess fabric strip to the right of the machine, making sure the strip is   free of tangles .
    4. keeping the binding strip flat when feeding into attachment to ensure the fabric edges will roll under when sewing .
    5. Pull binding strips out of the end of the binder and pivot the strip 90 to place it under the foot .
    6. Make sure the binding strip is still folded when placing under the presser foot .
    7. Feed the project to be bound along the left end of the attachment into the folded bias and under the presser foot .

      Frequently Asked Questions (FAQs)

      Have a Question?

      Be the first to ask a question.

      Ask The Gurus